Shop temperature was 25 deg C and humidity 40%. 30g resin was mixed with 11g hardner. About half of the epoxy was poured into another cup and glass bubbles were added to the original cup to create dry micro. Dry micro was applied to the applicable corners of stringers LWX and LWY using a popsicle …
Removed weight and nails from stringers LWX and LWY. Cut pieces of BID cloth to size for supporting the stringers.
Sanded electrical channels then vacuumed. Confirmed positions for wooden stringers LWX and LWY and predrilled nail holes to mark locations and to hold stringers in place. Shop temp 24 deg c and humidity 42%. 46g resin and 18g hardner was mixed with flox. Flox was applied to the bottom and interfacing edges of stringers LWX …
Shop temp 25 degrees C Humidity 50% Mixed 32g resin and 12g hardner with glass bubbles and then applied the micro slurry to the bare foam inside the electrical channels at the aft end of both fuselage sides. Added more glass bubbles to create dry micro to apply to the corners for the bid fabric …
Lots of sanding to do today on the bottom of both fuselage sides.[simple_slider arrows=”hover” nav=”dots” transition=”slide” auto_rotation=”1″ fullscreen=”1″] [simple_slide img=”https://beyondblue.ca/wp-content/uploads/2015/10/12112130_1699795226920274_5160037090511643102_n.jpg”] [simple_slide img=”https://beyondblue.ca/wp-content/uploads/2015/10/12115877_1699795256920271_8402007308760211884_n.jpg”] [simple_slide img=”https://beyondblue.ca/wp-content/uploads/2015/10/12118934_1699795266920270_5301725967839217716_n.jpg”] [simple_slide img=”https://beyondblue.ca/wp-content/uploads/2015/10/12143192_1699795296920267_5794515478424117484_n.jpg”] [/simple_slider]
