Windy with a little bit of snow at CYPQ this afternoon. Cleaned the hangar up and setup for a holiday potluck lunch later this week. Ran the Citabria engine to ensure that the new fuel valve is functioning as expected, then topped up the tanks with Avgas.
Surprise the pilot in your life with a gift to start off the New Year right – The Suborbital Pilot’s Ground School Manual. These are exciting times in the development of space travel and discovery and many who read this manual are destined to play an active role in the conquest of space. Space is …
Removed the peel ply from the head duct and the seat brace. Drilled holes through the glass into the aluminum tubes. Trimmed the glass edges of the heat duct and the seat brace using the Dremel tool. Sanded the glass edges of the heat duct and sanded the front seatback to fit the heat …
Cozy Experimental Aircraft Update – December 9, 2017 Read More »
On December 2 the last Burger Burn of the year was held by the Canadian Historical Aviation Association in Windsor, Ontario with a decent turn out. Santa and his helpers provided gifts for the young ones and young at heart. A new item was just received from a donor…a Frasca flight simulator…in really good condition. …
Glassed the 2nd side of the seat brace and repaired the bottom of the instrument panel. Shop temperature was 25 deg C and the humidity was 48%. 168g resin was mixed with 64g hardner. A small portion of epoxy was poured into 2 small cups. Glass bubbles were added to one cup to make dry …
Cozy Experimental Aircraft Update – December 3, 2017 Read More »
