Citabria Update – August 25, 2018
A scenic flight in the Kawarthas today with a few aileron rolls for added fun. Video clip of today’s flight. Here are some photos as well ….
Cozy Experimental Aircraft Update – August 7, 2018
Fabricated a 22″ long sanding block from a 2 by 4 and 9 x 11 inch 40 grit piece of sandpaper. The sandpaper was cut in half length wise and glued to the 2 by 4. Commenced sanding the NACA Scoop’s urethane foam such that it is level from the landing brake to 1/8″ above …
Cozy Experimental Aircraft Update – August 7, 2018 Read More »
Citabria Update – August 6, 2018
Flying in the circuit at CYPQ this morning. The B29 hasn’t left yet so I was able to taxi passed it and get a picture. I posted a video of the flight at the Beyond Blue Aerospace youtube channel. If you are interested in learning to fly tailwheel in the Citabria then give this handbook …
Cozy Experimental Aircraft Update – August 4, 2018
Mixed a 1:1 ratio of water and Alumiprep#33 in a plastic container and dipped the 16 aluminum inserts into the mixture for abour 3 minutes then rinsed them off with water. Covered the 16 aluminum inserts with Alodine 1201 and let them dwell in the Alodine for about 3 minutes then rinsed off the inserts …
Cozy Experimental Aircraft Update – August 4, 2018 Read More »
Cozy Experimental Aircraft Update – July 29, 2018
Trimmed 2-ply of BID cloth to fit on each of the plywood braces between the firewall and the aft landing gear bulkhead. Mixed a batch of epoxy using 142g resin and 54g hardner. Shop temperature 24 deg C and humidity 62%. Applied epoxy to the BID cloth using a paint brush. Mixed a batch of …
Cozy Experimental Aircraft Update – July 29, 2018 Read More »