More contouring of the aircraft floor.

Continuing to make spacers to shape the aircraft floor.

Continuing to shape spacers for the aircraft floor.

Contouring the floor spacers: Trimmed the 3/4 ” foam to size with the band saw then used a small hand saw to get close to 30 degree bevels and used a sanding block to complete the slope.

Transferred bottom assembly to the work table. Marked the landing brake cutout. Used a jig saw at 45 deg to cut out the landing brake with 1″ radius corners. The fuselage bottom will be given depth and contour by gluing on tapered spacers made from 3/4 “ thick low density foam.