Taping the floor to the front seat joints (seatback & fuselage sides). Workshop temperature was 24 deg C and humidity 51%. Cut 2 layers of BID cloth to cover two 2″x17″ and two 2″x19″ strips. Mixed 120g resign with 46g hardner to make a batch of epoxy. Wet out the BID cloth and the …
Cozy Experimental Aircraft Update – May 13, 2018 Read More »
Setup and initial testing of our remotely controlled ignition system. Here is a video of the workshop tests. The ignition system prototype is now being prepared for outside tests at our Crooked Creek Facility.
Taping the rear seat fuselage sides to the floor: Cut 2-ply of BID cloth to make two 2″ x 30″ and two 2″ x 13″ strips of BID tape. Workshop temperature was 25 deg C and the humidity 48%. A batch of epoxy was mixed using 124g resin and 47g hardner. The BID cloth …
Started off flying crosswind circuits at Peterborough (CYPQ) and then flew to Lindsay (CNF4), then Greenbank (CNP8), and back to Peterborough. Jason was the backseat driver and photographer today. See the video. It was a great morning for a flight but when we got back the power was out at the airport, the wind …
It was a pleasure to play a small part as the master of ceremony at Alloy Fusion’s inaugural show Under the Stars at the Ganaraska Forest Centre Saturday evening. The event was a lot of fun and the Alloy Fusion handbell ensemble was fantastic ! Music: Handbell Odyssey Moonlight Sonata City of Stars Aurora Borealis …
