Using the grinder I sharpened up a few of the chisels. The chisels were used to remove masonite that was stuck to the outer surface of the right fuselage side. Next, any PVC foam that was stuck to the right side form was removed and glued back into the right fuselage side. Any lumps of …
A great afternoon to spend at the airport ! We had a good view during lunch … then a preflight check of the Citabria … and out for a run over Lakefield and back to CYPQ … for a low and over to check out the crosswind … then around the field for a landing and …
Sanded the inside of the fuselage sides some more. Popped the fuselage sides out of the forms !
Today’s young pilots may very well have opportunities to become space pilots during their lifetime. The skills required for piloting crafts that will fly into space are similar to a regular pilot’s but will require additional training. Opportunities for career transitions from air to space piloting are not that far away. The number of commercial spaceports …
The fiberglass edges around stringers LWX and LWY and the lower longerons were trimmed and sanded.
