A centreline was marked on the plank at 4.625″ (4 5/8) from each side. Two sets of two 2x4s were nailed to the 10′ plank perpendicular to the centerline, level, and exactly 101.75″ apart. The 101.75″ is measured from the outboard side of both sets and 101.75″ was confirmed across multiple locations along the 2x4s. The temporary firewall …
Procured a 2″ x 10″ x 10′ plank and two 2″ x 4″ x 8′ s for Cozy fuselage assembly and alignment. A 2″ x 10″ x 10′ plank was placed in position on the shop floor and shimmed level. This plank will serve as the base ( W.L. 0.0) of the jig for fuselage …
I had the starter and alternator inspected. The started needed new brushes and the alternator needed to be replaced. Here is the old alternator … It is a Prestolite PN ALE 6406 (12 v) which is no longer available. I purchased a new AL12P70 ‘Plane Power’ Light Weight Alternator. It was also time for a …
Adjusted fit of temporary firewall (right side) to ensure the longerons and stringer pass through the pre-cut holes in the firewall. The Cozy fuselage is starting to take form …
Adjusted fit of temporary firewall (left side) to ensure the longerons and stringer pass through the pre-cut holes in the firewall.
