ZERO-G flight contest #ZG400
Thank you ZERO-G for giving away seats on G-FORCE ONE ! #ZG400 This is a great opportunity for 4 lucky folks to experience zero g. You bet I will give this a shot, below is my video entry. https://youtu.be/uLU5HKmWK6Q
Cozy Update – September 3, 2016
The fuselage sides were clamped into the temporary firewall (rear of fuselage) and bulkhead F22 was clamped in position at the front of the fuselage such that the top of F22 is at WL 23 and the centreline of F22 is aligned with the centreline of the jig. This will ensure that the top of both fuselage side longerons …
The Suborbital Pilot’s Ground School Manual
Commence your suborbital pilot studies today using our easy to read ground school manual … Check it our at our CreateSpace E-store https://www.createspace.com/3806436
Cozy Update – August 13, 2016
Installed a wooden brace with the glue gun to support the firewall so it remains vertical during fuselage assembly. I also replaced the clamps holding the bottom of the temp firewall to the 2x4s with a couple of wood screws.
Cozy Update – August 7, 2016.
Adjusting the temporary firewall with clamps so that it is centred over the plank, level, and the tip of the longerons will be 23″ above the plank. I ensured the 23″ height from the plank to the line where the top of the fuselage sides will be. The temporary firewall was centred to the plank …