Month: September 2017

Cozy Experimental Aircraft Update – September 17, 2017

Cut four 10″ x 2″ strips of BID cloth at 45 deg orientation.

Shop temperature was 25 deg C and humidity 48%.

46g resin was mixed with 18g hardner.

Wet out two sets of the strips (2-ply each) with the epoxy.

Wet the inside corners of the lower firewall with epoxy.

Poured some of the epoxy into a small paper cup and added flox to create a thick flox.

Flox applied to both inside corners of the lower firewall.

Corners taped and tape edges covered with Dacron and wet out with epoxy.

Curing in progress.