Cut four 10″ x 2″ strips of BID cloth at 45 deg orientation.
Shop temperature was 25 deg C and humidity 48%.
46g resin was mixed with 18g hardner.
Wet out two sets of the strips (2-ply each) with the epoxy.
Wet the inside corners of the lower firewall with epoxy.
Poured some of the epoxy into a small paper cup and added flox to create a thick flox.
Flox applied to both inside corners of the lower firewall.
Corners taped and tape edges covered with Dacron and wet out with epoxy.
Curing in progress.