Cozy Update – January 8, 2016
I sanded the electrical channel cover flush with the foam, vacuumed, and turned up the thermostat to start heating the shop for tomorrows work.
Cozy Update – January 3, 2016
BID cloth cut at 45 deg orientation and rough fit to form the electrical channel cover. Shop temp 24 deg C and humidity 38 %. 30g resin and 11g hardner mixed with glass bubbles to make micro slurry. Micro applied go the areas of foam where the BID cloth will be located. BID cloth positioned …
Cozy Update – January 2, 2016
A successful road trip to Guelph today to pickup a centresection jig which will be used to fabricate the main spar for the COZY MK IV … The jig made it back to our workshop and is safely stored under the work table.
Cozy Update – December 31, 2015
Sanded LWX & LWY corners and vacuumed. Shaped foam (using a utility knife, coping saw, and 5-minute epoxy) to fit in the area between LWX, LWY, and the lower longerons on both fuselage sides.