Saturday evening in the workshop … Shim added to top front of right fuselage side. Lots of sanding of the left fuselage side to align it with the front bulkhead F22. Small shim epoxy’d to top front of left fuselage side. 5-minute epoxy used to add the shims. Front bulkhead F22 and the fuselage sides …
Cozy Experimental Aircraft Update – October 29, 2016 Read More »
This is a free download of a UND Space Studies report by David LeFrancois describing ionizing radiation, its associated health hazards and exposure limits in the context of a manned mission to Mars. The sources and levels of radiation both en-route and on Mars are identified followed by a discussion and assessment of the potential methods of …
Manned Mars Mission – Radiation Hazards & Protection – Free Download Read More »
A rainy and windy morning at CYPQ … Jason adjusted the new aerobatic harnesses while Dave inspected the aircraft … We wanted to go flying but the weather didn’t cooperate for us so we rolled the plane out of the hangar to give the engine a run. The rain washed some more dirt off …
Next step is to sand the front of the right fuselage side to mate with the right side of front bulkhead F22.
Securing bulkhead F22 to the jig with 2 screws, in addition to the clamps. This will allow me to remove F22 after fuselage side alignment and return it to the same location later. Left side of fuselage side sanded to align with top of front bulkhead F22 at WL
