Glassed the 2nd side of the seat brace and repaired the bottom of the instrument panel. Shop temperature was 25 deg C and the humidity was 48%. 168g resin was mixed with 64g hardner. A small portion of epoxy was poured into 2 small cups. Glass bubbles were added to one cup to make dry …
Cozy Experimental Aircraft Update – December 3, 2017 Read More »
Now to cover the outside of the heat duct with 2 plies of BID at 45 deg. top and sides. Workshop temperature 25 deg C and humidity 48%. Mixed a batch of epoxy with 146g resin and 56g hardner. Poured some of it in another cup and added micro bubbles. Applied micro to the foam …
Cozy Experimental Aircraft Update – December 2, 2017 Read More »
Sanded corners on heat duct to ensure they are rounded. Drilled a hole in the glassed side of the seat brace to open up the aluminum tube. Placed the seat brace on blocks and the heat duct on a 2×4 to raise them up for glassing. Cut 2 ply’s of BID cloth for the 2nd …
Cozy Experimental Aircraft Update – November 27, 2017 Read More »
Started the work session with coffee. Trimmed and sanded the edges of the 7-layer UND layup on the heat duct and the edges of the 2-layer BID layup on the seat brace. Cut the 2 holes for the electrical channel out of the firewall. Cut and sanded the firewall longerons, and stringers to be flush …
Cozy Experimental Aircraft Update – November 18, 2017 Read More »
The team met in the Cobourg workshop to progress the planning and design efforts for our integrated propulsion system development program.
