Positioned the aircraft floor back on the worktable for preparation prior to glassing. Additional wood and shims were added to the bottom side of the aircraft floor to maintain the right shape on the worktable. 45 degree lines were drawn on the floor for fiberglass orientation. More BID cloth and 3M glass bubbles were ordered …
Cozy Experimental Aircraft Update – February 24, 2018 Read More »
Removed nails from the floor spacers. Trimmed spacers. Placed the floor on the fuselage assembly for a trial fit.
Installed Remaining Floor Spacers Workshop temperature 25 deg C and humidity 38%. 106g resin was mixed with 40g hardner and glass bubbles were added to make a batch of micro. Some of the micro was poured into a smaller cup and more glass bubbles were mixed in to make a small batch of dry micro. …
Cozy Experimental Aircraft Update – February 18, 2018 Read More »
Lots of foam trimming and sanding to finish making all of the floor spacers.
Removed the nails from the spacers that are now permanently installed. Trimmed the aft spacers and the centre spacer. Continued shaping the front seat floor with spacers.
