Cut out the headrest pieces using a band saw. Shaped the shoulder braces including the 45 deg bevels so they fit with the seatback. Used 5-min epoxy to install the wooden inserts into the shoulder brace. Started to assemble the headrests. Beyond Blue Aerospace is your source for aircraft parts. If you are a general …
A short cross country trip today including the grass strip at Greenbank (CNP8) and lunch on the patio in Lindsay (CNF4). Contact us at [email protected] if you have any questions about learning to fly tailwheel aircraft and visit us at the Beyond Blue Shop.
The shoulder support braces were fit into position and temporarily held in place with nails. Next, the headrest pieces were glassed. Shop temperature 25 deg C and humidity 62%. 124g resin and 47g hardner were mixed and split into 2 cups. Glass bubbles were added to 1 cup and the headrest pieces were covered with …
Cut out the shoulder braces for the front seatback and redoing the headrests.
The front headrest pieces were cut out and assembled with 5-minute epoxy using a little flox mixed in. The right side headrest gets a front, back, and two sides whereas the left side headrest gets a front, two sides, and a bottom. The left side will be fastened to the canopy and the right side …
