Sanded LWX & LWY corners and vacuumed.
Shaped foam (using a utility knife, coping saw, and 5-minute epoxy) to fit in the area between LWX, LWY, and the lower longerons on both fuselage sides.
Shop temperature was 25 deg C and humidity 40%.
30g resin was mixed with 11g hardner. About half of the epoxy was poured into another cup and glass bubbles were added to the original cup to create dry micro.
Dry micro was applied to the applicable corners of stringers LWX and LWY using a popsicle stick.
The BID cloth was positioned along the corners of the stringers.
36g resin and 14g hardner were mixed and combined with the excess epoxy mixed earlier.
Epoxy was applied to the BID cloth with a 1″ wide paint brush.
30% off the price of The Suborbital Pilot’s Ground School Manual between now and January 1st 2016. Go to our CreateSpace eStore to purchase a copy of the manual and use code TEEVKEFU for a 30% discount !