Install Floor Spacers for Console: Workshop was heated to 25 deg C and the humidity was 31%. 96g resin was mixed with 36g hardner and glass bubbles to make a batch of micro. A small portion was poured into a 2nd mixing cup with more glass bubbles to make a small batch of dry micro. …
Cozy Experimental Aircraft Update – February 3, 2018 Read More »
Micro the aft aircraft floor spacers in place: Workshop temperature was 25 deg C and humidity 35%. 122g of resin was mixed with 46g of hardner and glass bubbles to make a batch of micro. Some of the batch was poured into a second mixing cup and more glass bubbles were added to the 2nd …
Cozy Experimental Aircraft Update – January 29, 2018 Read More »
Installing the centre floor spacer over the landing brake cutout. The workshop temperature was 25 deg C and the humidity was 36%. 110g resin, 42g hardner, and micro bubbles were mixed together and applied with a squeegee to the floor area where the centre spacer is installed. The centre spacer was positioned in place and …
Cozy Experimental Aircraft Update – January 26, 2018 Read More »
Contouring the aircraft floor some more then cleaned up the work table and surrounding workshop floor of all the scrap foam pieces and foam dust that has been building up.
