The foam edges around the plywood shoulder support inserts were beveled.
Shop temperature 24 degC and humidity 60%.
A batch of epoxy was mixed using 128g resin and 48g hardner.
Three ply BID cloth 5″ x 5″ was wet out then cut into sixteen 1.25″ squares. Four squares were applied on top of each of the four plywood shoulder support inserts resulting in 12-ply of BID on each of the four inserts.
A small batch of micro was mixed and applied to the sides of both front seat headrests. Two ply of 10″ x 30″ BID cloth was wet out and then cut in half and the 5″ x 30″ pieces were applied to the sides of both headrests. An extra 3 plies of BID was added at the top of both headrests and peel ply was used at the rough edges.
Beyond Blue Aerospace is your source for aircraft parts.
If you are a general aviation pilot, aircraft maintenance organization, aircraft mechanic, or homebuilder we can provide you with quality new and used aircraft parts.
Whether you are looking for Cessna parts, Beechcraft parts, American Champion parts, Piper parts, or experimental aircraft parts you’ve come to the right place.
Visit the Beyond Blue Shop today !