Taping the rear seat fuselage sides to the floor:
Cut 2-ply of BID cloth to make two 2″ x 30″ and two 2″ x 13″ strips of BID tape.
Workshop temperature was 25 deg C and the humidity 48%.
A batch of epoxy was mixed using 124g resin and 47g hardner.
The BID cloth was wet out with a squeegee and epoxy was applied to the corners of the fuselage with a paint brush.
A small batch of flox was mixed and applied to the corners where the fuselage sides meet the floor.
The BID tape was cut and applied to the corners.
