Removed the peel ply and trimmed the excess fiberglass from the aft heat duct.
Drilled the seatbelt anchor holes out.
![](https://beyondblue.ca/wp-content/uploads/2020/02/84512595_527871474500372_2991888005238620160_n.jpg)
Sanded the aft heat duct then cut a hole in the top of the heat duct for the transition piece.
![](https://beyondblue.ca/wp-content/uploads/2020/02/84462640_178179450071843_5200407600985800704_n.jpg)
Workshop temperature 20 deg C and 41% humidity.
Mixed 12g resin and 4g hardner with some flox to make a thick batch of flox.
Flox’d the transition piece in place.
![This image has an empty alt attribute; its file name is image-1.png](https://beyondblue.ca/wp-content/uploads/2019/07/image-1.png)