Sized paper (templates) to fit in the forward and aft scoop sections such that it will be 1/4″ past the edges and >3/4″ onto the bulkheads.
Cut 2 ply of BID cloth to the size of the templates.
Cut peel ply.
Workshop temperature 24deg C and humidity 52%.
Mixed a batch of epoxy using 152g resin and 58g hardner.
Wet out the 2-ply BID cloth for the aft scoop section.
Mixed a small batch of dry micro to fill any gaps in the aft scoop foam and to fill the corners.
Mixed a batch of micro to cover the foam. Used epoxy to wet the bulkheads where they overlap with the cloth.
Placed the 2-ply BID cloth in the scoop and scissor trimmed the edges to ~1/4″ past the edges.
Applied peel ply and more epoxy.
