Cozy Experimental Aircraft Update – May 6, 2018

Taping the rear seat fuselage sides to the floor:

 

Cut 2-ply of BID cloth to make two 2″ x 30″ and two 2″ x 13″ strips of BID tape.

Workshop temperature was 25 deg C and the humidity 48%.

A batch of epoxy was mixed using 124g resin and 47g hardner.

The BID cloth was wet out with a squeegee and epoxy was applied to the corners of the fuselage with a paint brush.

A small batch of flox was mixed and applied to the corners where the fuselage sides meet the floor.

The BID tape was cut and applied to the corners.