Shop temp 25 degrees C
Humidity 50%
Mixed 32g resin and 12g hardner with glass bubbles and then applied the micro slurry to the bare foam inside the electrical channels at the aft end of both fuselage sides.
Added more glass bubbles to create dry micro to apply to the corners for the bid fabric to transition smoothly.
Cut 2 pieces of approx 4″ x 11″ bid cloth and placed them in each electrical channel cutout.
Mixed 30g resin and 11g hardner and applied the epoxy to the bid cloth.
Trimmed the bid cloth with electric scissors and left the channels to cure.